Hydraulic Cylinders

A hydraulic cylinder is a type of mechanical component or an actuator that gives a unidirectional force through […]

Product Description

What is Hydraulic Cylinder?

A hydraulic cylinder is a type of mechanical component or an actuator that gives a unidirectional force through unidirectional strokes using the liquid as a working medium to exert force to carry out desired work. You can get get hydraulic cylinders from Crane Bel.

 

How Hydraulic Cylinders Works?

 Hydraulic cylinders from Crane Bel obtain their power from pressurized fluid, which is generally a kind of oil. It consists of a cylinder barrel, where a piston moves back and forth, which is connected to a piston rod. One side of the barrel is closed by the cap, called the cylinder bottom, and the other side of the barrel is closed by the cylinder head, also called the gland.

Out of that area, the piston rod comes out, which is the component that carries force outwards of the cylinder. The Piston has seals and sliding rings; the Piston divides the internal cylinder into two parts.

  1. Bottom chamber (cap end) and
  2. Piston rod side chamber (head or rod end)

The hydraulic cylinder from Crane Bel is the motor or actuator side. The ‘generator’ side is hydraulic; ic pump, which exerts the regulated and fixed flow of fluid (oil) to the hydraulic cylinder, then moves the Piston.

The oil is pushed in the chambers and then back to the reservoir through the force of a piston. So, let’s say the oil enters from the cap end during the extensional stroke, and the oil pressure in the rod end\head end is approx. zero, the force F on the piston rod equals the pressure P inside the cylinder times the piston area A. So, F=P.A

There are three types of pump widely used:

  1. Hydraulic Hand Pump
  2. Hydraulic Air Pump
  3. Hydraulic Electric Pump

 

Uses Of Hydraulic Cylinders:

Theyare primarily used in earth-moving equipment like in construction to lift or lower the heavy loads, arms, buckets, or booms by equipping them in JCBs. Other uses are to use them in hydraulic bending, metal

sheet shearing machines, hot press for plywood, or particleboard. You can buy hydraulic cylinders from Crane Bel.

In case you’re also looking to buy hydraulic cylinders, you can connect with us at Crane-Bel. Let us tell you that Crane-Bel enjoys a covetable position in the market due to its technological expertise, so you can be assured with our products.

 

Our Other Products: Broaching MachinesHydraulic Press MachineSPM MachineHydraulic CylindersHorizontal Broaching MachineVertical Broaching MachineOil Filtration SystemHydraulic Power Unit, etc.

For Your Enquiry Please Write us

    Enquire Now
    close slider